Eyepiece and telescope pairing
Connecting a camera to the Sky-Watcher Heritage 130P
The exact thread or barrel that lets a camera reach prime focus on the Sky-Watcher Heritage 130P, and the adapter that makes it work.
- Telescope interface
- 1.25 in focuser (no rear-cell thread); a T-adapter noses into the focuser
- Adapter needed
- a 1.25 in prime-focus (nosepiece) T-adapter, plus a camera-brand T-ring
- Camera-side thread
- T-thread (M42 x 0.75), via a camera-brand T-ring
- Prime-focus focal length
- 650 mm (f/5)
Not for prime-focus imaging. The Sky-Watcher Heritage 130P reaches a camera only through its 1.25 in focuser with a nosepiece T-adapter, but a manual tabletop Dobsonian base does not track, so long-exposure prime focus is impractical. It is a visual and short-exposure lunar scope.
A camera reaches a telescope's prime focus through a T-adapter that matches the telescope's interface on one side and the standard T-thread, M42 x 0.75, on the other. A camera-brand T-ring then bayonets to the body.
Unlike a Schmidt-Cassegrain, this design has no threaded rear cell, so the camera mounts through the focuser drawtube. Check that the focuser has enough inward travel to reach focus with the mirror or sensor where a camera sits.
The adapter to buy
Search Amazon for a 1.25 in prime-focus (nosepiece) T-adapteraffiliate searchFind a 1.25 in prime-focus (nosepiece) T-adapter on eBayaffiliateSearch Amazon for Camera-brand T-ring (M42 x 0.75)affiliate searchFind Camera-brand T-ring (M42 x 0.75) on eBayaffiliate